Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerez tercihlerinizi değiştirmek, çerezler ve çerez kullanımı ile kişisel verileriniz hakkında detaylı bilgi almak için Kişisel Verilerin Korunması ve Kullanılmasına İlişkin Aydınlatma Metni’ni ve Çerez Bilgilendirme sayfasını  inceleyeniz.
X
Products

STC SKI TRAINING CONVEYOR

BELT CHASSIS

Belt chassis are modular and manufactured from sheet and profiles, they are covered with hot dip galvanized. The design of the chassis allows them to work on slopes up to 12% and can be produced in lengths of more than 100 m. Thanks to the telescopic adjustable feet under the chassis, it can be easily mounted on bumpy surfaces and in addition to this feature, the location of the belts can be changed as desired with the advantage of its modular structure.

UPPER STATION GROUP

The upper station is located at the end of the conveyor belt. There is a drive drum which enables the belt to move at the desired speed and is driven by a geared electric motor.

SUB STATION GROUP

The substation is located at the entrance of the conveyor belt. The idler drum used for stretching the belt and the ice on the surface of the belt and the heater for cleaning the snow are located on this chassis.

BELT

The belt surface has special design that is non-slippery. It has a special connection system that allows the belt to be removed and attached easily and safely.

SECURITY SYSTEMS

There is a safety system that prevents the belt from moving without closing the side covers of stations. At the end of the belt, there is a belt stop security system that prevents hands from crushing that may occur as a result of falling.

BELT DRIVE SYSTEM AND ROLLERS

Belt drive system consists of electric motor, gearbox, motion and idler drum, rollers, brushed drum and tensioning system. For better adhesion, the drums are covered with a special rubber material with grooves on them.

ELECTRICAL SYSTEM

The electrical system is powered by 380 V AC and for operational safety, the operation control system is powered by 24 V DC. There is an emergency stop button on each control panel for safety. Electric cables are passed through closed parts and protected against environment conditions. The entire electrical system is secured with high quality fuses. There is an inverter that allows the belt speed to start from slow to fast and also allows the adjustment of different belt speeds.

OPTIONS

• Different belt widths
• Feature of mounting up to 400 m in any length
• Possibility to make a slope close to 20%
• Canopy
• Possibility to produce steel parts from stainless steel material
• Hand rail suitable for both children and adults